Product Index

A pigmented, thixotropic epoxy resin coating. In building construction, it is applied as a wall and base coating, and in underground construction it is used as a coating for pipes, shafts and water collection basins.

RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its colour is creamy-white.

RECKLI Epoxy Compound 61/20 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames and decorative parts. Its colour is creamy-white.

RECKLI Epoxy Compound 71/30 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or synthetic stone, various metals and plastics. Its colour is creamy-white.

A two-component spatula material on a epoxy resign base. The product hardens virtually free of shrinkage and is used for touching up wooden, steel, and concrete bases, which are subsequently coated.

A base- and adhesive spatula mass on an epoxy resin base. It levels out holes, depressions and blemishes and is suited for application on cement-bound bases, wood, ceramic, steel and polystyrene.

A glass-fiber reinforced, synthetic spatula mass on an epoxy resin base. The impact-, pressure-, and bend-resistant spatula mass is applied as a protective casing for moldings. It can be applied to moist bases and hardens nearly free of shrinkage.

A repair-adhesive mortar on an epoxy resin base. It fills irregularities and blemishes on cement-bound bases or steel surfaces and is suited for adhesions in the floor- or wall-area.

A modified epoxy resin with the same properties and areas of application as Support Material EP-F Type L, yet with a lower specific weight.

A modified epoxy resin. Depending on the resin content, a mortar mixture, flow coating or spatula material with excellent adhesion is made. A particular area of application is the production of decorative quartzite floors.

RECKLI Construction Resin EP Rapid is a multi-application two-component resin. It is suitable for multi-application in construction: Coatings, adhesions, as a bonding course or a binding agent for polymer concrete, mortar, screed, -casting masses or for synthetic resin sandstone mixtures. It binds quickly and is proven at low temperatures. The product is colorless.

A modified epoxy resin. This product has a long pot life with a low-stress hardening and is applied in casting large-volume or heat-sensitive building elements.

A modified epoxy resin. Thanks to its heat deflection temperature, short pot life and low viscosity, it is suited as a binder for the production of GFK laminates in casting, spraying and hand lay-up processes.

A modified epoxy resing with significantly improved light- and yellowing- resistance. The product serves as a binding agent in the production of light stone carpets and quartzite floors with more coarse granulation.

A modified epoxy resin which is analog to EPOXY LB, which is however applied as a binding agent in the production of light stone carpets and quartzite floors with finer granulation.

A modified epoxy resin, very heat resistant and stress-proof. It is used as a binding agent in the production of polymer concrete. The low viscosity ensures a high degree of filling and excellent processability of the polymer concrete.

A modified epoxy resing which is used in mold- and form-making. Depending on the added agent, it can be blended for stable backfilling or as a hard, quickly-drying casting compound.

RECKLI Flooring Resin EP is a low-viscosity, two-component resin. It is particularly suitable as a binding agent for liquid-tight screeds and mortars and may be applied as a well-penetrating primer on cementitious substrates or as a sealant for bedding layers. The product is colorless.

A modified epoxy resin with a long pot life to fill fissures in the concrete building parts. Even the most fine cracks can be safely filled in the casting process or with a high- or low-pressure injection pump.

RECKLI Polymer Resin EP is a fluid, two-component resin which is particularly suited as a binding agent for backfilling in blockmoulding. The product is transparent.

RECKLI SI Colour paste serves as colouration for RECKLI SI-casting masses and moulding pastes. Its colour is green.

For the pigmention principally of colourless RECKLI PUR Elastomers.

RECKLI Stop Off Paste PUR is a cold-setting, elastic, two-component, polyurethane-based plastic to produce tailor-made barriers on RECKLI textured formliners. The freshly mixed product becomes a paste when poured and allows the creation of custom elastic barriers for the production of concrete elements using textured formliners and moulds.

US Formliner Platinum is a solvent-free, rubbery-elastic, liquid, two-component polyurethane, cold-curing, almost shrinkage-free, after curing sliceable and grindable. It shows high chemical resistance against aqueous alkali, especially concrete. Its standard color is gray.

A castable polyurethane elastomer in a softer adjustment. It is suited especially well for producing long-lasting casing formliners for patterned exposed concrete elements. Standard color is gray.

RECKLI PUR-Elastomer A70 is a pourable, elastic, two-component synthetic resin for the production of formliners and structural moulds, moulded parts or recesses in concrete construction. Its colour is grey.

RECKLI PUR-Elastomer K is a pourable, elastic, two-component synthetic resin for the production of formliners and structural moulds, moulded parts or recesses in concrete construction. Its colour is grey.

A castable polyurethane elastomer with increased tear resistance and low-level firmness. It serves the production of long-lasting formliners for concrete elements with a large pattern depth or light undercuts. Standard color is gray.

US Formliner Silver is a solvent-free, rubbery-elastic, liquid, two-component polyurethane, cold-curing, almost shrinkage-free, after curing sliceable and grindable. It shows high chemical resistance against aqueous alkali, especially concrete. Its standard color is dark gray.

A brushable and spatula-spreadable two-component synthetic. The product is suited for touching up on and repairing molds, installations, formliners and forms made of RECKLI PURE elastomers.

A polyurethane elastomer for use in vertical and overhead areas. It particularly serves the production of concrete castings for forms with a high life-span.

A viscoplastic polyurethane casting material. Suited for producing hollows or form parts in machine-, tool-, form- and mold-making, that are exposed to high pressures or abrasion.

A viscoplastic polyurethane casting material. Can be applied as the Pure Casting Material 75, but differs in its degree of firmness.

RECK-o-lan 85 Type N is a two-component synthetic resin for the production of hard-wearing moulded parts in the construction of machinery, tools, moulds and models. The product is particularly suitable for recesses in concrete construction. Its colour is grey.

A viscoplastic polyurethane casting material. May be applied like the RECK-O-Lan-85, but has a higher degree of firmness.

A ready-to-use concrete removal agent to apply to US Formliner formliners and solvent resistant, absorbing casing bases. It does not cause any adhesion issues when further processing the concrete.

RECKLI Stripping Wax TL-Eco is a high-quality, dilute, demoulding agent from renewable material, specially developed for RECKLI formliners. The product physically works via film formation. It is suitable for application on non-absorbent formwork made of sealed wood or plastic.

A ready-to-use concrete removal agent for long encasing periods. The properties coincide with the Release Wax TL. A chemically active release effect ensures a problem-free removal in the case of drying periods of more than 24 hours.

A watery, ready-to-use concrete removal agent, it is suitable for use with US Formliner formliners as well as non-absorbent casing bases. It protects from staining and imprints, without causing adhesive problems during later finishing.

A watery ready-to-use removal agent for plaster molds from elastic synthetic forms, it reduces the formation of bubbles on the plaster surface. Later layers of coating have no adhesive problems.

RECKLI PUR Seal is a moisture-curing, one-component fluid plastic for the preparation of absorbent, solvent-resistant model surfaces in mould construction. The product is particularly suited for the waterproofing of timber formwork, chipboard, multiplex, MDF or wood core plywood. The colour is brown-transparent.

RECKLI PUR-Sealant LI is a moisture-curing, single-component liquid plastic for the preparation of absorbent, solvent-resistant model surfaces in mould construction. The product is particularly suited for the waterproofing of timber formwork, chipboard, multiplex, MDF, or wood core plywood. The colour is light yellow/transparent.

The RECKLI PUR-Sealant LI falls below the legal limits for monomeric diisocyanates and is therefore usable without additional training.

RECKLI Stripping Aid K is a liquid, solvent-based wax combination with slightly greasy additives. It is used to improve the release properties of RECKLI Mould Wax. A specific application is its use on RECKLI Mould Wax when casting elastic molds made from RECKLI Polyurethane Elastomers from plaster models in the stoneware, ceramics, and porcelain industry. Here, RECKLI Stripping Aid K is not suitable for use as the sole release agent.

A silicone molding material for standard requirements. The product is virtually free from shrinkage and is applied in producing highly elastic, dimensionally stable forms in a full-casting or case-casting process.

A silicone molding material for high requirements. The silicone synthetic has the same properties and areas of applications as SI Casting Material 21 AV, but is more tear-resistant.

RECKLI EcoSil 25 is a pourable, two-component silicone rubber and intended as deforming material for single use. Its color is beige.

A silicone molding material for standard requirements. It is suitable for producing highly elastic, very delicate forms in a full-casting or casing-casting process and reproduces detailed patterns.

A silicone molding material for high requirements. The is used in the production of highly elastic, especially tear-proof forms and reproduces even constrictions and undercuts true to detail.

Can be applied the same as SI casting material 20. The silicone material is translucent.

A silicone molding material for simple requirements. It is suited for producing elastic relief- and profile forms and reproduces even delicate surface structured true to detail.

A silicone mold paste for working on vertical surfaces and overhead areas. The product is applied in producing elastic and thin-walled forms.

RECKLI SI Colour paste serves as colouration for RECKLI SI-casting masses and moulding pastes. Its colour is green.

RECKLI Graffix Basic is a dilute impregnation for the treatment of concrete surfaces and other hard, absorbent mineral substrates. It demonstrates a UV-stable, breathable and open to water vapor diffusion protective impregnation with anti-adhesion properties.

RECKLI Graffix Basic Cleanser is a gel-type cleaning agent for the removal of graffiti. It is specially formulated for application on concrete surfaces, which have been treated with RECKLI Graffix Basic.

RECKLI Epoxy-Seal is a solvent-containing, two-component special lacquer for pigmented sealing of concrete and screed floors in garages, retail and showrooms, balconies and terraces*. Its colour is grey.

* in the sense of Guideline 42/2004/EG, Appendix I, 1.1j

RECKLI Epoxy-Solution is a solvent-containing, two-component plastic for sealing and increasing the stability of porous, mineral surfaces.

RECKLI PUR Seal B75 is a low-solvent, one-component sealant for concrete and screed floors, slabs, multilayer boards and square timbers in the concrete and construction industry. The colour is brown-transparent.

RECKLI PUR Seal L75 is a low-solvent, one-component sealant for concrete and screed floors, slabs, multilayer boards and square timbers in the concrete and construction industry. Additionally, the product is suitable for sealing wooden flooring and parquet*. PUR Sealant L75 is colourless and transparent.

* in the sense of Guideline 42/2004/EG, Appendix I, 1.1i

RECKLI PUR Seal is a moisture-curing, one-component fluid plastic for the preparation of absorbent, solvent-resistant model surfaces in mould construction. The product is particularly suited for the waterproofing of timber formwork, chipboard, multiplex, MDF or wood core plywood. The colour is brown-transparent.

RECKLI OS D is a colorless, dilute impregnation with a silicone base. The product is suitable for the handling of absorbent concrete components.

RECKLI OS HO is a colorless, dilute impregnation. The product is suitable for the treatment of absorbent, mineral substrates and particularly for the protection of façades or other vertical surfaces made of concrete.

RECKLI OS Intensiv is a dilute impregnation with a highly cross-linked acrylate polymer base. The product is especially suitable for treating vertical, exposed concrete surfaces.

RECKLI OS Premium is a colorless, solvent-free impregnation. The product is suitable for the treatment of absorbent, mineral substrates and particularly for the protection of concrete paving, slabs and façades.

RECKLI Cleanser 64 is a liquid, acidic and free of hydrochloric acid cleaning agent for the removal of cement residue, lime efflorescence, rust stains and dirt on mineral substrates and various metals. For concrete surfaces, subsequent efflorescence is avoided.

RECKLI Concrete cleaner is a highly-concentrated cleaning agent for the removal of cement residue, lime efflorescence and rust stains on mineral substrates.

RECKLI Concrete Remover is an aqueous acidic cleaner, suitable for the removal of concrete stains and spills from shuttering, working equipment and construction machinery. It can be applied without the formation of mists or aerosols.

RECKLI Epoxy Cleanser is a cleaning agent for the removal of dirt from tools and working surfaces in the application and processing of RECKLI polyurethane and epoxy resin products.

RECKLI EK-PU-Thinner is a thinning material for use with RECKLI one-component polyurethane resin. The product is suitable for the cleaning of concrete formwork and tools with stubborn dirt.

Rugged, handy knife with stationary blade for cutting RECKLI Formliners 2/(...).

Solid plastic pail with two handles for a permanent action. Available in sizes of 40-L-content and 75-L-content.

Suitable for electric drilling maschines, for mixing liquid or pasty material.

Profiled knife for later cutting of single-piece moulds made of elastic silicones or polyurethanes, profile leads to a matching effect.

Contains: Formliner knife, Serrated Trowel, Spiral Stirrer, Grinding Disk.

The RECKLI Toothed Smoother is a tool for the uniform application of materials in paste or fluid form. The sheet size is 14x28cm, the tooth depth is approx. 2mm.