Formen & Abformen

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or…

RECKLI Construction Resin EP Rapid is a multi-application two-component resin. It is suitable for multi-application in construction: Coatings,…

RECKLI EcoSil 25 is a pourable, two-component silicone rubber and intended as deforming material for single use. Its color is beige.

A brushable and spatula-spreadable two-component synthetic. The product is suited for touching up on and repairing molds, installations, formliners…

A pigmented, thixotropic epoxy resin coating. In building construction, it is applied as a wall and base coating, and in underground construction it…

A two-component spatula material on a epoxy resign base. The product hardens virtually free of shrinkage and is used for touching up wooden, steel,…

A modified epoxy resin. Thanks to its heat deflection temperature, short pot life and low viscosity, it is suited as a binder for the production of…

A base- and adhesive spatula mass on an epoxy resin base. It levels out holes, depressions and blemishes and is suited for application on cement-bound…

A modified epoxy resing with significantly improved light- and yellowing- resistance. The product serves as a binding agent in the production of light…

A modified epoxy resin which is analog to EPOXY LB, which is however applied as a binding agent in the production of light stone carpets and quartzite…

This modified epoxy resin serves as a surface resin for instructional, laminating and negative forms. The ceramics industry used it as surface resin…

A modified epoxy resin. Propertied and application areas are analog to EPOXY OH. The coloration is blue instead of white.

A modified epoxy resin, very heat resistant and stress-proof. It is used as a binding agent in the production of polymer concrete. The low viscosity…

A modified epoxy resing which is used in mold- and form-making. Depending on the added agent, it can be blended for stable backfilling or as a hard,…

A glass-fiber reinforced, synthetic spatula mass on an epoxy resin base. The impact-, pressure-, and bend-resistant spatula mass is applied as a…

RECKLI Flooring Resin EP is a low-viscosity, two-component resin. It is particularly suitable as a binding agent for liquid-tight screeds and mortars…

A modified epoxy resin with a long pot life to fill fissures in the concrete building parts. Even the most fine cracks can be safely filled in the…

US Formliner Platinum is a solvent-free, rubbery-elastic, liquid, two-component polyurethane, cold-curing, almost shrinkage-free, after curing…

RECKLI Polymer Resin EP is a fluid, two-component resin which is particularly suited as a binding agent for backfilling in blockmoulding. The product…

A viscoplastic polyurethane casting material. Suited for producing hollows or form parts in machine-, tool-, form- and mold-making, that are exposed…

A viscoplastic polyurethane casting material. Can be applied as the Pure Casting Material 75, but differs in its degree of firmness.

A castable polyurethane elastomer in a softer adjustment. It is suited especially well for producing long-lasting casing formliners for patterned…

RECKLI PUR-Elastomer A70 is a pourable, elastic, two-component synthetic resin for the production of formliners and structural moulds, moulded parts…

RECKLI PUR-Elastomer K is a pourable, elastic, two-component synthetic resin for the production of formliners and structural moulds, moulded parts or…

A castable polyurethane elastomer with increased tear resistance and low-level firmness. It serves the production of long-lasting formliners for…

A polyurethane elastomer for use in vertical and overhead areas. It particularly serves the production of concrete castings for forms with a high…

RECK-o-lan 85 Type N is a two-component synthetic resin for the production of hard-wearing moulded parts in the construction of machinery, tools,…

A viscoplastic polyurethane casting material. May be applied like the RECK-O-Lan-85, but has a higher degree of firmness.

For the pigmention principally of colourless RECKLI PUR Elastomers.

RECKLI SI Colour paste serves as colouration for RECKLI SI-casting masses and moulding pastes. Its colour is green.

A silicone molding material for standard requirements. It is suitable for producing highly elastic, very delicate forms in a full-casting or…

A silicone molding material for standard requirements. The product is virtually free from shrinkage and is applied in producing highly elastic,…

RECKLI SI Thickener Liquid AV is a fluid material, which effects a pasty consistency of addition-cured RECKLI two-component silicones. It allows…

A condensation cross-linking thixotropic agent for two-component silicones. The product thickens silicone elastomers to make them coatable or…

US Formliner Silver is a solvent-free, rubbery-elastic, liquid, two-component polyurethane, cold-curing, almost shrinkage-free, after curing sliceable…

A natural thixotropic agent for epoxy resins and polyurethanes. The addition of the powder allows an application of thicker layers and spatula work on…

A synthetic thixotropic agent for epoxy resins and polyurethanes. The area of application of the color-neutral powder is analog to Suspending Agent…

A modified epoxy resin with the same properties and areas of application as Support Material EP-F Type L, yet with a lower specific weight.

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or…

RECKLI Construction Resin EP Rapid is a multi-application two-component resin. It is suitable for multi-application in construction: Coatings,…

RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames,…

RECKLI Epoxy Compound 61/20 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames and decorative…

RECKLI Epoxy Compound 71/30 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts…

An inorganic filler for mixing two-component casting resins on an epoxy resin and polyurethane base. The finely ground chalk can be blended without…

An inorganic light filler for mixing two-component casting resins on an epoxy resin and polyurethane base. The product enables a substantial volume…

RECKLI Flooring Resin EP is a low-viscosity, two-component resin. It is particularly suitable as a binding agent for liquid-tight screeds and mortars…

A silicone molding material for high requirements. The is used in the production of highly elastic, especially tear-proof forms and reproduces even…

Can be applied the same as SI casting material 20. The silicone material is translucent.

A silicone molding material for high requirements. The silicone synthetic has the same properties and areas of applications as SI Casting Material 21…

A silicone molding material for simple requirements. It is suited for producing elastic relief- and profile forms and reproduces even delicate surface…

A silicone mold paste for working on vertical surfaces and overhead areas. The product is applied in producing elastic and thin-walled forms.