Epoxy Resins

RECKLI Construction Resin EP is a multi-application two-component resin. It is suitable for multi-application in construction: coatings, adhesions, as a bonding course or a binding agent for polymer concrete, -mortar, -screed, -casting masses or for synthetic resin sandstone mixtures. It binds quickly and is proven at low temperatures. The product is colorless.

RECKLI Construction Resin EP Rapid is a multi-application two-component resin. It is suitable for multi-application in construction: Coatings, adhesions, as a bonding course or a binding agent for polymer concrete, mortar, screed, -casting masses or for synthetic resin sandstone mixtures. It binds quickly and is proven at low temperatures. The product is colorless.

RECKLI Electro Resin EP is a two-component resin, especially suitable for the pouring of compact electro and electronic parts and switches. It fulfils the requirements according to Appendix II of Guideline 2011/65/EU (RoHS). The product is transparent.

RECKLI Epoxy GC is a special two-component laminating resin for fiber-reinforced plastics. It may be applied by hand or sprayed on. It is suitable for model construction and relief-casting with RECKLI Filler L as a filler and as a binding agent for production of GFRP laminates. Its color is white.

RECKLI Epoxy LB is a fluid, thixotropic, cycloaliphatic two-component epoxy resin. It is particularly suitable as a binding agent for the production of bright, coarse-grained quartzite floors. The product is opaque/transparent.

RECKLI Epoxy LB Clear is a fluid, cycloaliphatic two-component epoxy resin. It is particularly suitable as a binding agent for the production of bright, fine-grained stone carpets. The product is pale transparent.

RECKLI Epoxy PB is a fluid, two-component resin which is particularly suited as a binding agent for polymer concrete. The product is transparent.

RECKLI Epoxy WST is a two-component resin, which is particularly suitable as an application with fiberglass-reinforced laminates. The product can be used as a binding resin for rear-filling and support mortars, as well as for light mortars with RECKLI Filler L. The product is transparent.

RECKLI Flooring Resin EP is a low-viscosity, two-component resin. It is particularly suitable as a binding agent for liquid-tight screeds and mortars and may be applied as a well-penetrating primer on cementitious substrates or as a sealant for bedding layers. The product is colorless.

RECKLI Injection Resin EP is a fluid, two-component resin. It serves to seal hairline cracks in cementitious substrates or for the grouting in the waterproofing of masonry. The resin is suitable as a primer for concrete and screed floors. The product is transparent.

RECKLI Polymer Resin EP is a fluid, two-component resin which is particularly suited as a binding agent for backfilling in blockmoulding. The product is transparent.

RECKLI Epoxy BT is a pigmented, thixotropic, two-component epoxy resin coating. The product serves in building construction as wall and base coating, in underground construction as a coating for pipes, shafts, water retention basins and separation equipment for liquids according to prEN 858-1. It is suitable for use on vertical surfaces. Its color is grey.

RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its colour is creamy-white.

RECKLI Epoxy Compound 61/20 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames and decorative parts. Its colour is creamy-white.

RECKLI Epoxy Compound 71/30 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or synthetic stone, various metals and plastics. Its colour is creamy-white.

RECKLI Epoxy Flex Filler is a two-component smoothing compound for the filling of holes, cracks, indentations, uneven spots and butt joints on wood, steel and cementitious substrates, which should be coated with RECKLI Epoxy Resin products. One particular application is the repair of holes in panels. Its color is dark grey.

RECKLI Epoxy GF Filler is a fibreglass reinforced, two-component filler for the production of supporting shells for elastic shapes made of RECKLI PUR- or SI-Elastomers. The filler is a replacement for supporting shells made of plaster or concrete. Its colour is grey.

RECKLI Epoxy GS is a two-component filler for priming, adhesion and leveling work for cementitious substrates, engineered wood, ceramics, steel surfaces and polystyrol. The product is particularly suited as a primer filler on concrete for coating with RECKLI Epoxy BT.

RECKLI Epoxy OH is thixotropic, two-component surface resin for the production of laminate moulds and negatives in model and mould construction or for working models in ceramics. The product is suitable for spreading and smoothing of knocks, joints, imperfections, particularly in wood and steel. Its colour is white.

RECKLI Epoxy OH Blue is a thixotropic, two-component surface resin for the production of laminate moulds and negatives in model and mould construction or for working models in ceramics. The product is suitable for spreading and smoothing of knocks, joints, imperfections, particularly in wood and steel. Its colour is blue.

RECKLI Rapid Epoxy Type LS is a robust, two-component filler for repair and adhesive work. The product is suitable for cementitious substrates and steel surfaces. Suitable for the filling of uneven spots, holes and defects in wall and floor areas. May be used for the adhesion of large format concrete components. Its color is grey.

Supporting Mass EP-F Type VB is a particularly light, fibreglass-reinforced, two-component tamping mass for the production of heavy supporting shells made of RECKLI PUR or SI Elastomers. The product replaces heavy supporting shells made of plaster or concrete and is suitable for the production of robust supporting forms and backfills in the ceramic and porcelain industries. Layer coating is possible in thicknesses of up to 30mm. Its colour is light blue to light brown.